CR -6062 Industrial grade fuel level transmitter (fuel level sensor) is a special instrument tailored for the accurate measurement of fuel level such as railway locomotive, automobile fuel tank, tank truck and fuel depot. The whole machine does not have any movable or elastic parts, and is resistant to impact, easy to install, high in reliability, high in precision, and good in performance and price. It can be installed in various occasions to accurately measure and control the fuel level of gasoline, diesel fuel and hydraulic fuel. It is also suitable for the measurement of various non-conductive liquids. Such products can also be used to measure conductive media in the case of particularly harsh on-site conditions, particularly severe electromagnetic interference, and particularly high agitation.
The CR-6062 industrial grade fuel level transmitter (fuel level sensor) core components are converted to standard electrical signals (typically 4-20 mA) using advanced RF capacitance sensing circuits through 16-bit microcontrollers with precise temperature compensation and linear correction. Optional HART, CANBUS, 485 communication protocol for system configuration. The full range of transmitters are self-calibrating, allowing users to automatically calibrate “zero” and “range” with two buttons or two leads to suit different requirements in complex locations.
CR -6062 Industrial Grade Fuel Level Transmitter (Fuel Level Sensor) Working Principle
The sensing part of the CR-6062 industrial grade fuel level transmitter (fuel level sensor) is a coaxial container that causes a change in the capacitance between the sensor housing and the sensing electrode when the fuel enters the container. This variation is passed through the circuit. The conversion is performed with precise linear and temperature compensation, and a 4-20 mA standard signal is output to the display meter.
CR -6062 Industrial Grade Fuel Level Transmitter (Fuel Level Sensor) Performance Specifications
● Detection range: 0.05 -5m
● Accuracy: 0.1, 0.2, 0.5
● Pressure range: -0.1MPa-32MPa
● Probe temperature resistance: -50 -250℃
● Output signal: 4-20mA, 4-20mA superimposed HART communication, 485 communication, CAN bus communication
● Power supply voltage: 12-28VDC (Intrinsically safe type needs to be powered by safety barrier)
● Fixing method: Thread mounting M20×1.5,M27×2,M18×1.5,M16×1
Flange mounting DN25, DN40, DN50.
Special specifications can be customized according to requirements
● Probe diameter: Φ 12 , Φ 16 , Φ 25
● Explosion-proof grade: Intrinsic Exia II CT6 Explosion-proof Exd II CT5
● Protection level: IP65
● Intrinsic safety parameters: Ui : 28VDC , Ii : 93mA , Pi : 0.65W , Ci : 0.042uf , Li : 0mH
CR -6062 industrial grade fuel level transmitter (fuel level sensor) for occasions
CR -6062 Standard Fuel Level Transmitter (Fuel Level Sensor) Industrial grade, suitable for measurement of viscous fuel quality below 5MPA and temperature below 200℃, can be connected with various protocols
CR -6062 Compact fuel level transmitter (fuel level sensor) Industrial grade, suitable for measurement below 5MPA, temperature less than 200℃, low viscosity fuel, can be connected with various protocols