CR-606 Series Fuel Level Transmitter

Short Description:

The sensing part of the CR-606 series capacitive fuel level sensor is a coaxial container. When the fuel enters the container, the capacitance changes between the sensor housing and the sensing electrode.This amount of change is converted by the circuit and accurately linear and temperature compensated, and a 4-20 mA standard signal is output to the display meter.


Product Detail

Product Tags

CR-606 fuel level transmitter (sensor) working principle

The sensing part of the CR-606 series capacitive fuel level sensor is a coaxial container. When the fuel enters the container, the capacitance changes between the sensor housing and the sensing electrode. This change is converted by the circuit and is accurate. Linear and temperature compensated, output 4-20mA standard signal is supplied to the display instrument.

CR-606 fuel level transmitter (sensor) performance indicators

● Detection range: 0.05-5m

● Accuracy: 0.1, 0.2, 0.5

● Pressure range: -0.1MPa-32MPa

● Probe temperature resistance: -50-250℃

● Output signal: 4-20mA, 4-20mA superimposed HART communication,

485 communication, CAN bus communication

●Power supply voltage: 12-28VDC (intrinsic safety type needs to be powered by safety barrier)

●Fixed mode: threaded mounting M20×1.5, M27×2, M18×1.5, M16×1

Flange mounting DN25, DN40, DN50.

Special specifications can be customized according to requirements

● Probe diameter: Φ12, Φ16, Φ25

●Explosion-proof grade: intrinsic safety ExiaIICT6 flameproof ExdIICT5

●Protection level: IP65

●Intrinsic safety parameters: Ui: 28VDC, Ii: 93mA, Pi: 0.65W, Ci: 0.042uf, Li: 0mH

CR-606 fuel level transmitter (sensor) for occasions

CR-6062 compact fuel level transmitter (sensor) industrial grade, suitable for 5MPA or below, temperature below 200℃, viscosity is not high fuel measurement, can be added with various protocols of communication

CR-6061 automotive-specific fuel level transmitter (sensor) is suitable for the measurement of various fuel under normal temperature and pressure. The output damping time is adjustable from 30 to 180s. It can be equipped with 485 communication.

CR-6062 standard fuel level transmitter (sensor) industrial grade, suitable for measurement below 5MPA, viscous fuel quality below 200℃, can be added with various protocol communication

CR-6063 high temperature and high pressure type fuel level transmitter (sensor) industrial grade, suitable for below 32MPA, temperature measurement below 250℃, can be attached to various protocols

CR-6061 universal fuel level transmitter (sensor) is suitable for measuring various fuel and hydraulic fuel under normal temperature and pressure, and can be equipped with 485 communication.


  • Previous:
  • Next:

  • Write your message here and send it to us